|
SPECIFICATIONS - All Sizes:
FABRIC TYPE: Nylon Rip Stop, 70 Denier, High Tenacity (Type 6.6 nylon yarn). FABRIC BREAKING STRENGTH: Warp = 60 pounds / inch, Fill = 60 pounds / inch. FABRIC WEIGHT: 2.1 Ounce minimum / 2.6 Ounce maximum (per square yard). FABRIC POROSITY: ZERO / Cubic Foot Air / Square Foot Fabric / Minute. FABRIC FINISH: Urethane Coated, ½ Ounce / Square Yard with U.V. Inhibitors. FABRIC COLOR OPTIONS: Black, White, Bright Yellow, Orchid, Red, Light Blue, Royal Blue, Kelly Green, Raspberry, Turquoise, Silver, Gold, Maroon, Navy Blue, & Light Green.
LINES: Dacron Polyester (water repellent), 1,575 pound tensile strength, heat set and stabilized, micro-stretch construction, synthetic finish, hollow core. SIDE VENTS: 3 - left, 3 - right (all adjustable from full open to fully closed in center). REAR VENTS: 5 upper, 3 lower (all side & rear vents have edges reinforced with nylon tape). WEBBING, YOKE: Nylon, 2 inches wide, 4,500 pound tensile.
WEBBING, HARNESS: RISERS: Nylon, Mil-W-27265, Type 7, 1½" inches wide, 6,500 pound tensile. SADDLE: Nylon, 3" wide, 9,000 pound tensile.
HARNESS CARABINEERS: Stainless Steel construction, French manufacture "INOX" design, tensile strength 3,000 pounds.
YOKE / V-RINGS: Stainless Steel construction, USA manufacture, ¼" diameter solid wire design, tensile strength 2,500 pounds.
TOW LINE: Polypropylene, ½" diameter, 3-strand twisted filament, hi-visibility yellow color, safe working load 400 pounds, tensile strength 4,000 pounds.
THREAD, Canopy Minimum Requirement: VT-295E, Nylon Size E Thread, Type 2, Class 1, Subclass A, Left Twist, minimum 8.5 pound tensile, 8-11 stitches per inch.
THREAD Harness Minimum Requirement: VT-295E, Nylon Size 5 Thread, Type 2, Class 1, Subclass A, Left Twist, minimum 40 pound tensile, 4-6 stitches per inch.
MAIN SEAM AND VENT SUPPORT TAPE Mil-T-5038, Type 3, ½" Width, Ribbon Weave, Nylon 6.6 Tape, Class 1, Tensile Strength 250 pounds.
UPPER & LOWER LATERAL BANDS Mil-W-27265, Type 1, 9/16" Width, Herringbone Weave, Nylon 6.6, Class 1, Tensile Strength 500 pounds.
(PAGE TWO - SPECIFICATIONS)
(BACK TO "FEATURES" PAGE)
|
|